Compuprint 10200 Programmer Manual Manual do Utilizador descarregar pdf (Página 83)

Commands

255 Initializes printer to default settings. The download font is initialized. If parameters

are specified, they overwrite the default settings. This command will change data

stored in the macro’s non-volatile RAM. It will copy default settings from ROM, add

parameter changes, if any, and store in working RAM and all macros. It will also set

the default macro to disable.

The id parameter specifies the printer for which the following parameter bytes are

intended. If the ID does not address your printer, the mode bytes that follow are

ignored. The ID values are Hex = B6, Dec = 182.

parm

Specifies the following functions:

Bit Not set Set

7 Discard byte Process this byte Ignore this byte

6 Reserved

5 Alarm Alarm enabled Alarm disabled

4 Automatic CR No CR on vertical movement CR on vertical movement

3 Automatic LF No LF after CR LF after CR

2 Page length 11 inches 12 inches

1 Slashed zero Zero without slash Zero with slash

0 Character set CS1 CS2

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 233 234

Sem comentários

Compuprint 10200 Programmer Manual Manual do Utilizador Página 83