Compuprint 6314 Manual do Utilizador

Compuprint 6314/6414 User Manual rel. -002

Compuprint 6314/6414 - User Manual 1.7 Setting Up The Printer 1.7.1 Unpacking The Printer The printer is shipped in a carton and protective bag. Keep

Compuprint 6314/6414 - User Manual 1.7.2 Check List Your thermal printer kit contains the items listed below. - The thermal printer. - AC Power cor

Compuprint 6314/6414 - User Manual 1.8 Installation The following sections will guide you through the installation of the printer. - Place the print

Compuprint 6314/6414 - User Manual NOTE! The printer supports simultaneous connection of all available interfaces using the AUTOMATIC feature. The AU

Compuprint 6314/6414 - User Manual 1.9 Installing The Print Head WARNING! When the print head is already installed in the printer, it is fixed with a

Compuprint 6314/6414 - User Manual - Place the print head next to the connection cables. - Attach all cables to the corresponding connectors (see F

Compuprint 6314/6414 - User Manual - Push the print head in and match the two markers on the top of the print head with the guide holes on the print

Compuprint 6314/6414 - User Manual 2 OPERATION 2.1 Using The Printer 2.1.1 Controls And Indicators Fig. 9 – Controls and indicators All printer con

Compuprint 6314/6414 - User Manual 2.1.2 Powering The Printer On When all cables have been connected and the labels and ribbon have been loaded as de

Compuprint 6314/6414 - User Manual 2.2.1 Loading Labels Inside The Printer You can open the label loading area by lifting the hinged media cover on t

Compuprint 6314/6414 - User Manual Safety Instructions Never use the printer, if the mains values do not correspond to those given on the rating pla

Compuprint 6314/6414 - User Manual - Move the print head lock lever (11) to the open position (14) (see Fig. 11). 11 414Fig. 11 – Preliminary ste

Compuprint 6314/6414 - User Manual 4712 3 Fig. 12 – Label roll insertion and detail of paper path/sensor - Move the print head lock lever (11) to th

Compuprint 6314/6414 - User Manual - Slide the paper guide (7) into the printer until it touches the edge of the labels without blocking their movem

Compuprint 6314/6414 - User Manual For correct operation of the printer, perform the following steps after opening the label loading area and studying

Compuprint 6314/6414 - User Manual 2.2.4 Loading The Ribbon When printing by thermal transfer, the ribbon must be loaded as follows, after opening th

Compuprint 6314/6414 - User Manual 2.3 Printer Options 2.3.1 Tear-Off And Tear-Off Strip Tear Off mode is where each label is printed and then positio

Compuprint 6314/6414 - User Manual 2.3.2 Label Peel Off (Optional) The printer can be set up to automatically peel labels off the backing liner and di

Compuprint 6314/6414 - User Manual Fig. 20 – Detail of the paper path in the peel-off system - Manually position the leading edge of the first labe

Compuprint 6314/6414 - User Manual Fig. 21 – Installed peel-off system - Close the media cover. - Under the Set Printer Mode in the Enabling An

Compuprint 6314/6414 - User Manual Fig. 22 – Detail of the paper path in the rewinder guide Under the Set Printer Mode in the Enabling And Modes Menu

Compuprint 6314/6414 - User Manual Contents 1 Introduction _________________________________________________________________ 6 1.1 Warnings And Specia

Compuprint 6314/6414 - User Manual When powering the printer on, the automatic cutter is automatically enabled and opens for paper insertion. If the

Compuprint 6314/6414 - User Manual 2.4 Printing Adjustments 2.4.1 Label Variations And The TOF/Paper Out Sensor Your printer is equipped with a sensor

Compuprint 6314/6414 - User Manual Fig. 25 – Paper sensor adjustment knob Perform the TOF sensor Calibrate procedure described below whenever a dif

Compuprint 6314/6414 - User Manual Calibration Calibration is enabled via the front panel by using the Enter key and navigating through the menu. NO

Compuprint 6314/6414 - User Manual Manual Adjustment This function enables the printer to calibrate the paper sensor manually. This function is usefu

Compuprint 6314/6414 - User Manual Fig. 26 – Front of the printer with ribbon pushed to the side - Gently rub a cotton swab with Isopropyl alcohol

Compuprint 6314/6414 - User Manual 3 CONFIGURING THE PRINTER 3.1 Control Panel The printer is equipped with a control panel (see Fig. 28) containing t

Compuprint 6314/6414 - User Manual 3.1.1 Function Keys And LEDs The function of the keys and LEDs are indicated by the words printed next to them. Whe

Compuprint 6314/6414 - User Manual 3.2 Configuring The Printer 3.2.1 Overview The configuration process is carried out using the printer configuration

Compuprint 6314/6414 - User Manual Fig. 29 shows the menu map. FileMenuEnabling and ModesPrinterSettingsCommunicationParametersEmulationParametersL

Compuprint 6314/6414 - User Manual 3.2.3 Setting Printer Configuration Parameters _____________________________________________________ 40 3.2.4 Movin

Compuprint 6314/6414 - User Manual 3.2.2 Menu Navigation This section explains how to use the control panel to change individual settings and save the

Compuprint 6314/6414 - User Manual Example: 2410Z DT P 30º 2 = print density (2 DPI). 4 = print head width (4 inch). 10 = max. print speed (10 IPS).

Compuprint 6314/6414 - User Manual Changing printer settings, such as print speed or emulation, is referred to as configuration. You can configure th

Compuprint 6314/6414 - User Manual 3.3 File Menu This menu contains all the commands for saving and/or loading the configuration in/from the non-volat

Compuprint 6314/6414 - User Manual 3.3.1 Factory Reset Functions The factory reset function influences the following parameters: PARAMETERS DEFAUL VA

Compuprint 6314/6414 - User Manual 3.3.2 Others Parameters The following parameters are automatically saved in NVM memory and are not influenced by th

Compuprint 6314/6414 - User Manual 3.4 Enabling and Modes This menu contains all the items necessary for activating the sensors and optional features,

Compuprint 6314/6414 - User Manual 3.4.2 Set Printer Mode This function sets the operating modes of the printer. Press Enter function key to enter t

Compuprint 6314/6414 - User Manual 3.4.5 Password Selection This function allows the creation of a security password to prevent non authorized personn

Compuprint 6314/6414 - User Manual 3.5 Printer Settings The structure of this menu is illustrated in the following figure. The parameters in this menu

Compuprint 6314/6414 - User Manual 3.10 Communication Parameters Menu __________________________________________________ 64 3.11 Serial Interface_____

Compuprint 6314/6414 - User Manual 3.5.1 Vertical Offset Adjustment This function sets the label edge offset adjustment, setting a “mechanical” offset

Compuprint 6314/6414 - User Manual 3.5.4 Maximum Label Length Selection This function sets the maximum length of the label. Press Enter function key t

Compuprint 6314/6414 - User Manual 3.5.8 Backfeed Speed Selection This function sets the backfeed speed. Press Enter function key to enter in the BACK

Compuprint 6314/6414 - User Manual 3.5.13 Horizontal Offset Adjustment This function sets the horizontal right shift. Press Enter function key to ente

Compuprint 6314/6414 - User Manual 3.6 Emulation Parameters CDL Menu According to the emulation installed on the printer, it is necessary to set the c

Compuprint 6314/6414 - User Manual 3.6.2 Backfeed Offset This function sets the value of the backfeed offset. In some cases the label must exit the pr

Compuprint 6314/6414 - User Manual 3.6.5 Column Offset This function sets the value of the column offset. It is possible to move the printout image re

Compuprint 6314/6414 - User Manual 3.7 Emulation Parameters CZL Menu According to the emulation installed on the printer, it is necessary to set the c

Compuprint 6314/6414 - User Manual 3.7.3 Set Delimiter Character This function (SET DELIMITER CHARACTER) allows to change the default character 2C (he

Compuprint 6314/6414 - User Manual 3.8 Emulation Parameters CPL Menu According to the emulation installed on the printer, it is necessary to set the c

Compuprint 6314/6414 - User Manual 1 INTRODUCTION Our new offer now includes a new line of thermal and thermal transfer printers that can provide the

Compuprint 6314/6414 - User Manual 3.8.2 Error Report This function allows, if enabled, to print an error report on the label. Press Enter function ke

Compuprint 6314/6414 - User Manual 3.9 Diagnostic Menu ENTERSCROLLSCROLLEMULATIONPARAMETERSDIAGNOSTICMENUPAPER SENSOR MENUPRINTHEAD TYPE DETECTEDENTER

Compuprint 6314/6414 - User Manual 3.9.1 Run Automatic Adjustment This function enables the printer automatically to adjust the sensitivity of the pap

Compuprint 6314/6414 - User Manual 3.9.5 Run Manual Adjustment This function enables the printer to calibrate the paper sensor manually. This function

Compuprint 6314/6414 - User Manual 3.10 Communication Parameters Menu Press Enter function key and hold it while Power On the printer to enter in the

Compuprint 6314/6414 - User Manual 3.11 Serial Interface The following list describes all menu items in the Serial Port Functions top-level menu. ENT

Compuprint 6314/6414 - User Manual 3.11.3 Data Bits Number This item allows the selection of the number of data bits: 7 or 8 data bits. Press Enter fu

Compuprint 6314/6414 - User Manual 3.12 NIC Interface This menu contains all the networking interface communication parameters. ENTERIPASSIGNMENTIPAD

Compuprint 6314/6414 - User Manual 3.12.1 IP Assignment IP address assignment mode. - FIXED*: Assigns the static or fixed IP address. - DHCP: Assign

Compuprint 6314/6414 - User Manual 3.12.8 Mail Server Address This item is displayed only if the ENABLING SMTP function is selected in ENABLED mode.

Compuprint 6314/6414 - User Manual 1.3 Features - Thermal transfer and Direct thermal printing. - Supports over 17 types of bar codes. - Download f

Compuprint 6314/6414 - User Manual 4 TROUBLESHOOTING Problem Possible causes Solution The commands were not properly received. Check the configurati

Compuprint 6314/6414 - User Manual Problem Possible causes Solution The ribbon wrapped on the spindle (1) of Fig. 10 (page 19) is not secured to the

Compuprint 6314/6414 - User Manual 5 PRINTER SPECIFICATIONS TECHNICAL SPECIFICATIONS Printing type Direct thermal / Thermal transfer Resolution 203

Compuprint 6314/6414 - User Manual INTERFACES Standard Parallel Serial RS232 (9 pin plug DB connector) USB Optional Ethernet 1/100 Base T Table 10 –

Compuprint 6314/6414 - User Manual RIBBON SPECIFICATIONS Length 450 meters Width Max. 118 mm. Ribbon types Wide Spectrum Wax Ribbon Wax Resin Blend

Compuprint 6314/6414 - User Manual 6 CONFORMITY DECLARATION 6.1 EEC Regulations This equipment conforms to the EEC Directive 89/392 (the sound pressur

Compuprint 6314/6414 - User Manual 7 SERIAL PORT WIRING RS 232 serial port pin assignment (DB9 plug) Pin number Signal1 DCD 2 RXD 3 TXD 4 DTR 5 GND 6

Compuprint 6314/6414 - User Manual 8 INDEX OF FIGURES FIG. 1 – THE 6314-6414 PRINTER...

Compuprint 6314/6414 - User Manual 9 INDEX OF TABLES TABLE 1 – FUNCTION KEY FUNCTIONS ...

Compuprint 6314/6414 - User Manual 1.4 Thermal Printer Technology Quiet and fast, with excellent print quality, your multifunction thermal printer use

Compuprint 6314/6414 - User Manual 1.5.2 Ribbons CPG International offers a range of ribbons that have been specifically engineered to enhance printin