Compuprint MDP40B Programmer Manual Manual do Utilizador descarregar pdf (Página 207)

C-65

ESC | A

Define offset in elementary steps. (Olivetti PR2, PR40+)

ASCII Code ESC | A

Hexadecimal Value 1B 7C 41

Decimal Value 27 124 65

Defines, in n/120", the distance between the left margin and the edge of the printer

and constitutes the reference for all the horizontal setting or positioning functions.

As a result, the length of the line is reduced by n. Parameter n may be set to any value

from 0 to 999.

The command is not accepted (command specification error) if it is sent inside a

printing field or a device other than the front paper stand is selected.

ESC | B

Define document width in elementary steps. (Olivetti PR2, PR40+)

ASCII Code ESC | A

Hexadecimal Value 1B 7C 42

Decimal Value 27 124 66

Defines, in n/120", the actual width of the passbook on which magnetic operations are

to be carried out.

This command is used exclusively for horizontal magnetic recording/reading on

machines configured with left alignment, to determine the start position for magnetic

operations.

Parameter n may be set to any value from 0 to 1156 (width of slot)

The command is not accepted (command specification error) if it is sent inside a

printing field or a device other than the front paper stand is selected.

1 2 ... 202 203 204 205 206 207 208 209 210 211 212 ... 288 289

Sem comentários

Compuprint MDP40B Programmer Manual Manual do Utilizador Página 207